DIY – OneSharpeMomma

Toddler Bam Bam Halloween Costume [DIY]

Published on October 30, 2017September 5, 2018 by OneSharpeMommaLeave a comment

A quick, easy and inexpensive costume idea for a little boy is Bam Bam. Not only is it inexpensive for parents on a budget but it is cute as well. I purchased most of the materials listed below from Jo-Ann Fabrics or Wal-Mart. Some things I already owned. For reference, my little one is 19 months old.

[Directions on how to DIY a Pebbles costume as shown above…click here]MATERIALS NEEDED:

Orange Felt [1/2 a yard]
Brown Felt Sheet
White Felt Sheet
Brown Fabric
Sharp Scissors
Fabric Glue
Needle and Thread
Pen or Pencil
Pipe Cleaners
Tape Measure or Ruler
Plastic bowling pin or bat

STEP ONE: Measure

Grab your tape measure or a ruler if you don’t own one. You want to take the measurements of your child’s waistline and add two inches to that number. For example, if their waist circumference is 12 inches then make the width 14 inches. Learn from my mistake and don’t forget to add two inches.

You will also need to measure the length from your child’s waist to their knee. I added an inch to account for the waistband.

STEP TWO: Trace & Cut

First, I folded my orange felt in half so that it would be easier to cut two pieces of the same size. I then traced the width on the felt and drew a line. The next step is to trace the length and draw a line. I did this until I ended up with what looked like a rectangle. Then cut.

STEP THREE: Glue or Sew

First, I took a ruler and laid it alongside the felt on the shortest side. [This would be the length]. I then folded the top edge down 1 inch and pinned the sides. This is now your waistband. Complete the steps on the other piece of felt as well.

Initially, I glued the seams together and let it dry overnight. With a busy toddler that didn’t work out for me so I decided to hand stitch the seam using brown thread.

Waistband

For the waistband, I grabbed my brown fabric and cut two strips. I kept it simple and just laid the fabric across the top to see how long it needed to be. Once the strips were cut I threaded each one through the waistband and glued down the seam. The last thing I did was tie the pieces together into a knot on one side and tucked it into the waistband. [FYI, you may want to sew the waistband as well for a better hold or use a different glue than the one shown.]

STEP FOUR: Triangle Decals

Cutting the Decals

I used one sheet of brown felt to make the decals. I cut about 25 triangles to place on the front and back of the bottoms. I started off by using a two-inch strip and folding it in half. I then cut out as many triangles as possible. After I was done with that strip, I laid them down on the remaining brown felt and cut some more.

Applying the Decals

Beginning with one side, I arranged the felt decals on the dress. I spaced them out randomly until it had my desired look. This is the part where the glue came in handy for quick application. Just note, this glue doesn’t hold anything against a busy toddler. We lost a few triangles during our Halloween event.

When applying the glue, I tried my best not to lift the entire decal because I didn’t want to mess up placement. So I flipped one side up to apply glue (I forgot to take a picture but it would look like you are folding the triangle in half.) Then I did the same thing to the other half. It’s probably a little hard to imagine without a photo so do what works best for you.

Lastly, you flip the bottoms over and repeat these steps.

STEP FIVE: Cut Bottom

This step is quite easy. All you have to do is cut triangles out on the bottom as shown.

STEP SIX: Cross-body Strap

First you want to measure from the right side of your child’s waist up and over their left shoulder and back down to the right side of their waist. This measurement will be needed for the cross-body strap. [For example, 20 inches]

I laid the brown fabric out and cut a length of 20 inches. Since this piece of fabric was a remnant, I didn’t bother with cutting it how wide I wanted the strap to be. What I did instead was fold the fabric over itself and glued the side down.

Next you need to attach this piece of fabric to the bottoms. I sewed one side down as you can see in the photo and I used a pipe cleaner to attach the other side. You can stitch both sides down or do what I did. I took this approach because I thought it would make the process of putting the costume on easier.

STEP SEVEN: Making the Bone

I started with one sheet of white felt. Next, I folded it in half and used a pencil to sketch a bone. It was approximately 2″ by 6″. I then cut the shape being sure to hold both sides of the felt together. In the end I had two bone cutouts which I glued together.

Lastly, glue the bone onto the cross-body strap. Be sure to place it on the side you want to use as the front.

STEP EIGHT: The Bat

Find a plastic bat or a plastic bowling pin [which I already owned]. You can spray paint it brown or wrap it in brown fabric. I chose the latter because I had scraps of brown fabric already. The next thing I did was wrap the bowling pin with fabric and sealed it with glue.

FINAL STEP: Dress Your Child Up

Once you put the outfit on your child, be sure to pull the drawstring on the waist and tie it up. For cooler temperatures you can add a white onesie and shorts/ pants underneath. See pics of my little one below.

DIY Twin Costume Ideas

Published on October 27, 2017January 17, 2018 by OneSharpeMommaLeave a comment

halloween-2735141_640

Being a momma who likes to be on a budget, I thought about how I wanted celebrate Halloween this year. With 19 month old twins who don’t know a thing about Halloween I figured that should be an easy decision to make. Why not take advantage of this moment when I am the sole decider. Before you know it the twins will be telling me who they want to dress up as.

I started off by searching the web for inexpensive costumes that could work for doubles. I saw cute costumes for farm animals, sesame street characters, superheroes and tons of Disney characters. As much as I enjoyed the packaged costumes I just couldn’t fathom paying the price for them. Plus to be quite honest I’ve always been a fan of DIY and decided to take that route. Hey, I like to get crafty from time to time and tap into my creative side. So I decided to go with Pebbles & Bam Bam from the Flintstones which was quick and easy. The best part is I spent less than $15 for all the materials.

To see how I made these costumes click here for Pebbles and here for Bam Bam.

Otherwise here is a list of boy/ girl ideas I considered (and may potentially use next year). So many ideas can be added to the list but I thought these were cool DIYs.

Daniel the Tiger & Miss Elaina
Mickey Mouse & Minnie Mouse
Super Why & Word Girl
Dora & Diego {from Dora The Explorer}
Thing 1 & Thing 2 from Cat In The Hat
Children’s Books [i.e Eric Carle, Dr. Seuss, Ezra Jack Keats]
Dorothy, Scarecrow, Tin Man or Lion
Raggedy Ann & Andy
Tarzan & Jane
Peter Pan & Tinker Belle
Mr. & Mrs. Potato Head
Superman & Wonder Woman
King & Queen
Salt & Pepper
Lemon & lime
Pumpkins
Ketchup & Mustard
Sun & Moon
M&Ms
Peanut Butter & Jelly
Crayons
Milk & cookies

Continue reading “DIY Twin Costume Ideas” →

Toddler Pebbles Halloween Costume [DIY]

Published on October 25, 2017September 5, 2018 by OneSharpeMomma2 Comments

The Pebbles costume was easy to make and didn’t take a lot of time. Most of the items listed below were purchased from Jo-Ann Fabrics or I already owned them. To figure out how much felt is needed, get one of your toddler’s dresses to use as an outline. You will need to measure the width and length then multiply it by two. I purchased half a yard to account for error because sometimes I don’t get it right on the first try.

[For reference, my little is 19 months old. Also, for directions on how to DIY a Bam Bam costume as shown above…click here.]

WHAT YOU WILL NEED

Green Felt
Brown Felt Sheet
Sharp Scissors
Fabric Glue
Needle and thread
Pen or Pencil
Measuring tape or ruler
T-shirt or dress [from your child]
Blue Leggings
Plastic bones [Party City]

STEP ONE: Trace Outline

First, I laid the felt down folded in half. This way I would have a front and back outline after cutting. I then took one of my toddler’s dresses and laid it on top off the felt. You can pick whatever style you like but I prefer something that is A-line. You can go with sleeves or sleeveless. I chose to fold the sleeves in and make it sleeveless because it’s much easier to sew that way.

Using a black pen, I traced an outline of the dress onto the felt.

Tip – Place a dot at the bottom of the sleeve so you know where the arm opening should be.

STEP TWO: Cut

Using sharp scissors, cut the traced outline. Make sure you are holding both sides together to ensure two same sized pieces.

STEP THREE: Glue or Sew

I initially glued the seams together, leaving holes for the arm opening. What I later discovered after letting it dry for about two hours is that it wasn’t a great hold. Since felt is pretty stiff, there was a little bit of stretching when trying to put the dress on. My advice is to stitch the sides or try a different glue than the one shown in the photo below.

I grabbed a needle and black thread to stitch the seams. You honestly don’t have to worry about the color because when you turn it right side in, the thread won’t show.

Since I started by gluing the seams I had a guide for where the arm opening should be.

STEP FOUR: Cut Bottom of Dress

This step is quite easy. All you have to do is cut triangles on the bottom of the dress.

STEP FIVE: Dress Decals

Cutting the Decals

I used one sheet of brown felt to make the decals. I cut about 20 triangles to place on the front and back of the dress. I started off by using a two-inch strip and folding it in half. I then cut out as many triangles as possible. After I was done with that strip, I laid them down on the remaining brown felt and cut some more.

Applying the Decals

Beginning with one side, I arranged the felt decals on the dress. I spaced them out randomly until it had my desired look. This is the part where the glue came in handy versus sewing.

I tried my best not to lift the entire decal when gluing because I didn’t want to mess up placement. So I flipped one side up to apply glue (I forgot to take a picture but it would look like you are folding the triangle in half.) Then I did the same thing to the other half. It’s probably a little hard to imagine without a photo so do what works best for you.

Lastly, you flip the dress over and repeat these steps.

FINAL STEP: Enjoy Your Masterpiece

I love how everything turned out and the best part was it cost me less than $10!!! Luckily, my daughter already owned a pair of blue leggings but I am sure a cheap pair can be found anywhere.

My hubby and I won’t be dressing up as a family this year but I am hoping to get him in on the fun next time. See pics of my little one below and don’t forget to put a couple of bones in her ponytail.